List of Tables

Table 2.1: FGS1r Dark Counts

Table 2.2: FGS1r Dead Times

Table 2.3: Approximate Reference Positions of each FGS
in the HST Focal Plane

Table 2.4: Available Filters

Table 3.1: FGS1r TRANSFER Mode Performance: Binary Star

Table 4.1: Filters for which FGS1r will be Calibrated

Table 4.2: Default FES Times

Table 4.3: F-factor Transmission Estimator for Combination
of Filter and Color

Table 4.4: FGS1r: Dark Counts

Table 4.5: Recommended FGS1r Exposure Times

Table 4.6: FGS1r Transfer Mode Filters to be Calibrated
During Cycle 8

Table 4.7: Suggested Minimum Number of Scans for
Separations < 15 mas

Table 5.1: FGS1r Position Mode Calibration and Error Source
Summary

Table 5.2: FGS1r Transfer Mode Calibrations and Error-Source
Summary

Table 5.3: Library of cycle 10 calibration point source S-curves

Table 6.1: FGS Instrument Parameters

Table 6.2: Summary of Calibrated Mode and Filter Combination

Table 6.3: Pos Mode Optional Parameters

Table 6.4: Trans Mode Optional Parameters

Table 6.5: Pos Mode Overheads

Table 6.6: Pos Mode Overheads and Exposure Time vs. ­Magnitude

Table 6.7: Trans Mode Observing Overheads

Table 6.8: Target and Exposure Input for Example 1

Table 6.9: Target and Exposure Input for Example 3

Table 6.10: Reference/Check Star Pattern

Table 6.11:  Target and Exposure Input for Example 4

Table B.1: FGS1r Angular Resolution Test: Effective
Signal-to-Noise Ratios

Table B.1: FGS1r Angular Resolution Test: Binary Star Analysis