About This Article
In this STAN, we introduce a new search form available on MAST for the Hubble Spectroscopic Legacy Archive (HSLA), which contains most COS and STIS spectra organized across multiple programs by astrophysical object. Users can directly access HSLA data products by searching and filtering by target type, waveband, instrument or mode, observation date, radial velocity, and redshift. A future version of this search form will allow filtering on median signal-to-noise. We also announce the recent publication of four new STIS Instrument Science Reports (ISRs).
New HSLA Search Form Available
The Hubble Spectroscopic Legacy Archive (HSLA) provides coadded spectra of individual fixed targets that have been observed with the Cosmic Origins Spectrograph (COS) and the Space Telescope Imaging Spectrograph (STIS) over their operating lifetime. HSLA uses data available in the Mikulski Archive for Space Telescopes (MAST). Details on the various options for accessing HSLA data products are available in COS ISR 2025-18 and on the HSLA Website. In this STAN, we advertise a recently launched platform for users: The HSLA Search Form.
The HSLA Search Form is a part of the larger MAST archive that allows users to query a broad range of data products and metadata in a way complementary to the MAST portal. For HSLA data this is the most efficient way to visualize, discover, or filter data products for a variety of science uses before downloading any files.
Users can input specific targets, or search the full HSLA with a variety of primary filters (See Figure 1). These primary filters include: object name/coordinates, waveband (FUV, NUV, Optical/NIR), instrument, grating, target type, redshift or radial velocity, and date of observations. Target type selections rely on the HSLA classification scheme which is organized in hierarchical tiers. At tier level 1, most objects are classified as either “star”, “galaxy”, or “ISM”. Subsequent lower tiers 2 or 3 provide more specific classifications (i.e. Galaxy->Active Galaxy->BL Lac). In addition to these primary filters, users have access to a wide range of additional metadata that they can filter on. The resulting targets can then have associated data products downloaded for scientific use. Tables of results can also be downloaded. A full description of features is available at the MAST Mission Search Guide.
MAST also plans to deliver a feature for the HSLA Search Form that will also allow users to filter data products by a median signal-to-noise ratio (SNR) as calculated by the HSLA coadd code. This feature is expected to be delivered in the early part of 2027.
Users that include HSLA data products in their research are requested to cite COS ISR 2025-18. Any questions about the HSLA search form, the data products, or corrections to classifications can be directed to the HST help desk portal or the MAST Archive help desk portal.
Recent Instrument Science Reports
We are pleased to announce the publication of four new STIS Instrument Science Reports, the full list of STIS ISRs can be accessed here: https://www.stsci.edu/hst/instrumentation/stis/documentation/instrument-science-reports
ISR 2026-04: Wavelength Calibration Accuracy Across the STIS CCD: Pipeline Update and User Guidance
Matilde Mingozzi, Robert Jedrzejewski, Matt Siebert, Dan Welty, Sean Lockwood, Joleen Carlberg
We investigate the wavelength calibration accuracy of STIS CCD spectra as a function of detector position, focusing on the E1/E2 pseudo-apertures. Comparison between measured lamp line centroids and laboratory wavelengths shows that, while the standard calstis solution is stable at the detector center, significant offsets are present toward the CCD edges and increase with time. We used a test version of calstis in which the wavelength calibration step employs a row-selected cross-correlation, leading to improved wavelength calibration accuracy for edge extractions. Motivated by these results, we implemented an update to calstis4 that applies a row-selected wavecal procedure to observations taken with the E1/E2 pseudo-apertures, while preserving the standard procedure for nominal extractions. The updated pipeline was then used to reprocess the entire STIS archive in MAST. Validation tests confirm improved agreement between nominal and E1/E2 spectra without significant side effects for more than 97% of the datasets in the MAST archive. The main exceptions are the majority of G230MB and a few G230LB and G430M datasets, where the lower signal-to-noise at the CCD edge makes the lamp lines harder to detect and cosmic-ray residuals can dominate the cross-correlation, leading to incorrect wavelength shifts. A Jupyter Notebook is also provided to enable similar corrections in case the cross-correlation fails, for extractions at positions other than E1/E2, or for multiple extractions along the slit. Finally, we discuss the potential impact of the wavelength calibration accuracy on science results.
ISR 2026-05: Spatially Scanned STIS Spectra of the Exoplanet Host Star 55 Cnc
D. E. Welty, J. D. Lothringer, D. K. Sing, A. M. Jones, A. Riley, and C. R. Proffitt
We discuss the analysis of two sets of optical/near-IR spectra of the exoplanet host star 55 Cnc, obtained with the Space Telescope Imaging Spectrograph (STIS) and grating G750L in spatial scanning mode, in order to assess the performance of that relatively new observing mode for studies of transiting exoplanets. Standard pipeline reductions of the CCD spectral images were augmented by custom procedures for removing both cosmic rays and the strong fringing seen at wavelengths longer than about 7000 Å. Both total (“white-light”) fluxes and the fluxes for some narrower wavelength intervals were extracted from the processed spectral images. Apart from slight (∼400 ppm) orbit-to-orbit offsets between the relative fluxes in each set, the patterns exhibited by the flux values within each orbit are very similar. The systematic differences in the fluxes are somewhat smaller than those seen in archival STIS spectra of 55 Cnc obtained in so-called “stare mode”, in which the CCD is deliberately saturated at a fixed pointing. A parameterized detrending method similar to those commonly used to remove instrumental effects from time series observations of exoplanet host stars was then applied to the extracted fluxes. For the total fluxes, the scatter about the detrending models is of order 30-40 ppm – comparable to the best precision previously obtained for time series photometry with HST. The scatter is somewhat larger for the narrower wavelength bins – particularly at the longer wavelengths where the CCD is less sensitive; the defringing does reduce the scatter by 15-20% at the longer wavelengths, however. The depth of the transit of the super-Earth 55 Cnc e (∼ 450 ppm for the total flux) is consistent with previously obtained values. Both the scan-mode and the stare-mode observations of 55 Cnc e appear to indicate an unexpected (and variable?) increase in the transit radius Rp/Rs between 0.55 and 1.0 μm (by >40% for the scan-mode data). While these data are somewhat limited, they do suggest that spatial scanning with the STIS CCD can provide high-quality optical/near-IR spectra of the brighter exoplanet hosts.
ISR 2026-06: Updates to STIS NUV Dark Calibration
Jacqueline Brown, Sean Lockwood, TalaWanda Monroe, Amy Jones, Joleen Carlberg
We present new superdark calibration files (DARKFILEs) and a new dark correction table (TDCTAB) for use with data taken by the Space Telescope Imaging Spectrograph near-ultraviolet microchannel array (STIS NUV-MAMA) detector for HST Cycle 19 onward. These superdarks include 12 years of NUV dark exposures and make use of an updated temperature scaling equation developed in 2013 to more accurately characterize the dark rate. In tested datasets, the new superdarks provide an average 3% increase in SNR and smooth out a ring artifact left previously by oversubtraction of the dark rate. The new superdarks and TDCTAB have been delivered to the Calibration Reference Data System (CRDS) and have been used to recalibrate all affected datasets in the Mikulski Archive for Space Telescopes (MAST).
ISR 2026-07: Identifying Cosmic Ray Over-Flagging in STIS CCD Spectroscopic Observations
Matthew Dallas, Sean Lockwood
The standard method for rejecting cosmic rays in CCD data taken by the Hubble Space Telescope’s Space Telescope Imaging Spectrograph (STIS) instrument relies on combining multiple sub-exposures while flagging outliers. A known caveat of this method is that when the sub-exposures are not well registered, large portions of valid spectroscopic data can be flagged as cosmic rays. In this work we discuss the new ocrreject_exam() task in the stistools Python package designed to quickly identify datasets impacted by this misregistration-induced over-flagging. We demonstrate its effectiveness on known cases of over-flagged data, introduce a new monitoring website which automatically runs the tool on STIS CCD spectroscopic data, and analyze the tool’s output on STIS CCD spectroscopic data from 1997 through 2025. From this analysis we estimate that ∼31% of datasets will exhibit cosmic ray over-flagging. Lastly, we discuss various methods of recalibrating impacted data to mitigate the effects of over-flagging.
