For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting. 11/01/2021: Resubmitting the last 5 visits after they failed (HST safing due to timing problem) - Exposure times in the FUV have been increased, NUV exposure time has been decreased. Updated the betweens to accomodate the re-scheduling post-safing. Updates the links in visits AK-AN to be the same as the first 5 visits (1C-1G). 7/19/2021: The placeholder values for this program have been replaced by actual ETC calculation values, recorded for each Visit after completion of Orbit Packing. This Program was implemented by Alec Hirschauer, with Internal Review completed by Will Fischer. 6/23/2021: This is still a placeholder, but the end of the final BETWEEN was updated to account for new information in the TESS schedule. 6/7/2021: This is a placeholder for ULLYSES observations of GM Aur intended to allow tests of scheduling. While the exposure details given in this version are plausible, they may change significantly in the final executed version. Full details needed for bright object screening have yet to be provided, so this isn't ready for a final CS review. 1341346258 ----- Attempting Submission 1 (Mon Jun 07 15:59:32 GMT 2021) ----- ----- Attempting Submission 2 (Wed Jun 23 19:17:44 GMT 2021) ----- HST Phase II Proposal 16108 successfully submitted. Receipt: # 16108-2 ----- Attempting Submission 3 (Mon Jul 19 20:32:27 GMT 2021) ----- ----- Attempting Submission 4 (Mon Nov 01 20:23:56 GMT 2021) ----- All errors are due to missing ETC numbers (8 exp/vis x 12 vis). These will be provided with the full implementation. Current submission (7/19/2021) gives warning that "For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting." We are aware of the recommendation but are choosing to implement our Program as it is submitted. Current submission (11/1/2021) gives warning that "For the best data quality, it is strongly recommended that all four FP-POS positions be used when observing at a given COS CENWAVE setting." We are aware of the recommendation but are choosing to implement our Program as it is submitted. The Space Telescope Science Institute (STScI) Director has decided to devote up to 1000 orbits of Director's Discretionary time in observing Cycles 27-29 to a new Hubble Ultraviolet Legacy program focused on star formation and associated stellar physics. This new program, ULLYSES (UV Legacy Library of Young Stars as Essential Standards), will provide a UV spectroscopic reference sample of young (< 10 Myr) high- and low-mass stars. It will target ~165 OB stars in the Magellanic Clouds and lower metallicity galaxies in the Local Group, and ~67 T Tauri stars and brown dwarfs in the Milky Way. In addition, ULLYSES will monitor 4 typical T Tauri stars over different rotational phases through at least three rotation periods, and over timescales of months to years. The resulting library will provide template spectra of massive stars at metallicities substantially below the well studied, while the low mass sample will cover a wide range of ages, accretion rates, and masses, including objects down to well below 0.5 M_sun. The legacy of this large UV dataset on the first 10 Myr of stellar evolution will be enhanced by complementary datasets obtained by the scientific community. In addition to the core goals of the program related to stellar astrophysics of low and high mass stars, this data will also enable exciting science in the fields of ISM, CGM, jets, and exoplanets. ULLYSES will be modeled after the Frontier Fields program: all data obtained will be non-proprietary. The implementation team at STScI is developing high-level science data products and a sophisticated database and website for disseminating data from the ULLYSES program and ancillary datasets for the ULLYSES target sample from space and ground-based facilities. Observations use COS NUV + FUV and all visits are single orbit with SCHED=100. This target will be in the TESS field of view for Sectors 43 and 44. Furthermore, ground-based observers have requested that HST observations begin after October 1. For the purpose of coordinated observations, we set BETWEENs for all visits. 01 Oct 2021 00:00 - 11 Oct 2021 08:10 12 Oct 2021 17:00 - 24 Oct 2021 04:15 25 Oct 2021 17:20 - 05 Nov 2021 21:10 The rotation period of the target is 6.1 days = 92.2 orbits. We want to schedule 4 visits/period over three consecutive rotation periods, but we don't care about zero point shifts in the whole pattern. Ideal visit spacing would be 23.1 orbits. If we allow windows that are multiples of 23.1 +/- 4.1 orbits after visit 1 the required AFTER BY orbit values are as follows Visit 2 3 4 5 6 7 8 9 10 11 12 Start 19.0 42.0 65.1 88.2 111.2 134.3 157.4 180.4 203.5 226.6 249.6 End 27.2 50.2 73.3 96.4 119.4 142.5 165.6 188.6 211.7 234.8 257.8 The windows could be widened a bit if needed to facilitate scheduling. If possible, we would like to schedule visits during the period from roughly 0h to 16h UT every day when the target will be visible from LCOGT telescopes. More precise windows can be provided, and these can be enforced manually instead of as rigid BETWEENs. 0 false SUPPORTED STAR PRE-MAIN SEQUENCE STAR T TAURI STAR NO tstatus; V-GM-AUR ; P/COS approved for submission; S/ins not started; P/AH 19/07/21; S/xx DD/MM/YY tcheck; APT/SIMBAD target names: ; V-GM-AUR ... Default SIMBAD name is V* GM Aur, aka 2MASS J04551098+3021595 tcheck; Target info verification status?; OK ... spectral type and magnitudes seem to be consistent Flam(B) = 2.6e-10 at 4444 Angstroms and Flam(V) = 4.7e-10 at 5540 Angstroms from Vizier photometry viewer linked from SIMBAD tcheck; Coordinates & P.M. verified, epoch checked?; OK ... SIMBAD coordinates check out with what's here, SIMBAD PM values check out with what's here tcheck; Adopted SED compared to Observations?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/seds/ 2MASS-J04551098+3021595 HBC-77 J2000 SpT=K3, U=14.59, B=13.35, V=12.24, R=11.80, G=11.70, J=9.34, H=8.60, K=8.28 1635798071533 Timing link suitability includes constraints ([1D After 1C by 1.3 to 1.8 days] [1E After 1C by 2.8 to 3.3 days] [1F After 1C by 4.3 to 4.8 days] [1G After 1C by 5.8 to 6.4 days] [1H After 1C by 7.4 to 7.9 days] [1I After 1C by 8.9 to 9.4 days] [1J After 1C by 10.4 to 11.0 days] [1K After 1C by 11.9 to 12.5 days] [1L After 1C by 13.5 to 14.1 days] [1M After 1C by 15.0 to 15.5 days] [1N After 1C by 16.5 to 17.1 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit1982755593554860446.xml vstatus; 1C; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1634125771000 258.32529555665724 (Tic-Visit :proposal-id 16108 :visit-id "1C" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:11.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1C" :obset-id "1C" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1C" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798072517 Timing link suitability includes constraints ([1D After 1C by 1.3 to 1.8 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit8373277085552297626.xml vstatus; 1D; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1634280140000 257.9711972881157 (Tic-Visit :proposal-id 16108 :visit-id "1D" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:12.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1D" :obset-id "1D" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1D" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798073546 Timing link suitability includes constraints ([1E After 1C by 2.8 to 3.3 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit7910044959819220469.xml vstatus; 1E; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1634400204000 257.6847403575334 (Tic-Visit :proposal-id 16108 :visit-id "1E" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:13.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1E" :obset-id "1E" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1E" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798074503 Timing link suitability includes constraints ([1F After 1C by 4.3 to 4.8 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit18308992198833809928.xml vstatus; 1F; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1634503284000 257.43037761385364 (Tic-Visit :proposal-id 16108 :visit-id "1F" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:14.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1F" :obset-id "1F" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1F" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798075463 Timing link suitability includes constraints ([1G After 1C by 5.8 to 6.4 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit60337912855014709.xml vstatus; 1G; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1634657484000 257.03396270937725 (Tic-Visit :proposal-id 16108 :visit-id "1G" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:15.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1G" :obset-id "1G" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1G" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798076431 Timing link suitability includes constraints ([1H After 1C by 7.4 to 7.9 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit13135277725128500570.xml vstatus; 1H; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1634766213000 256.7419193459797 (Tic-Visit :proposal-id 16108 :visit-id "1H" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:16.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1H" :obset-id "1H" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1H" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798077764 Timing link suitability includes constraints ([1I After 1C by 8.9 to 9.4 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit8139995861897975469.xml vstatus; 1I; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1634914755000 256.32441256202026 (Tic-Visit :proposal-id 16108 :visit-id "1I" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:17.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1I" :obset-id "1I" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1I" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798078743 Timing link suitability includes constraints ([1J After 1C by 10.4 to 11.0 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit17626310416435039143.xml vstatus; 1J; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1635029094000 255.9870434589634 (Tic-Visit :proposal-id 16108 :visit-id "1J" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:18.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1J" :obset-id "1J" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1J" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798079741 Timing link suitability includes constraints ([AK After AJ by 1.3 to 1.8 days] [AL After AJ by 2.8 to 3.3 days] [AM After AJ by 4.3 to 4.8 days] [AN After AJ by 5.8 to 6.4 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit16645536566022896702.xml vstatus; 1J; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 (Tic-Visit :proposal-id 16108 :visit-id "AJ" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:19.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 61216 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "AJ" :obset-id "AJ" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "AJ" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798080742 Timing link suitability includes constraints ([1K After 1C by 11.9 to 12.5 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit17905773022315554667.xml vstatus; 1K; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1635183443000 255.50705543882037 (Tic-Visit :proposal-id 16108 :visit-id "1K" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:20.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1K" :obset-id "1K" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1K" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798081747 Timing link suitability includes constraints ([AK After AJ by 1.3 to 1.8 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit17975214321821028250.xml vstatus; 1K; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 (Tic-Visit :proposal-id 16108 :visit-id "AK" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:21.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 61216 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "AK" :obset-id "AK" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "AK" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798082802 Timing link suitability includes constraints ([1L After 1C by 13.5 to 14.1 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit9538729582793906161.xml vstatus; 1L; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1635314925000 255.07344324054213 (Tic-Visit :proposal-id 16108 :visit-id "1L" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:22.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1L" :obset-id "1L" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1L" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798083786 Timing link suitability includes constraints ([AL After AJ by 2.8 to 3.3 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit5520435052241248455.xml vstatus; 1L; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 (Tic-Visit :proposal-id 16108 :visit-id "AL" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:23.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 61216 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "AL" :obset-id "AL" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "AL" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798084773 Timing link suitability includes constraints ([1M After 1C by 15.0 to 15.5 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit12545737259202961275.xml vstatus; 1M; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1635434971000 254.65537834358497 (Tic-Visit :proposal-id 16108 :visit-id "1M" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:24.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1M" :obset-id "1M" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1M" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798086082 Timing link suitability includes constraints ([AM After AJ by 4.3 to 4.8 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit6968807767740984128.xml vstatus; 1M; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 (Tic-Visit :proposal-id 16108 :visit-id "AM" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:25.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 61216 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "AM" :obset-id "AM" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "AM" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798087097 Timing link suitability includes constraints ([1N After 1C by 16.5 to 17.1 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit460945854576987374.xml vstatus; 1N; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 1635555016000 254.2138637395226 (Tic-Visit :proposal-id 16108 :visit-id "1N" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:26.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 104688 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "1N" :obset-id "1N" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "1N" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. 1635798088091 Timing link suitability includes constraints ([AN After AJ by 5.8 to 6.4 days]) The scheduling data was generated by CASM 29.2. CASM was run in Phase II mode. /private/var/folders/xp/1hn1qjsn1b55pcrmzptg2_cc0004pj/T/OPVisit16127633031442521241.xml vstatus; 1N; V-GM-AUR; P/COS approved for submission; P/AH 19/07/21 ; intrev: complete ; P/WF 19/07/21 vcheck; Enter targ name & Inst. & Resp. Sci.; GM Aur ; COS ; AH vcheck; ETC numbers entered in APT?; Yes vcheck; Any screening violations?; No vcheck; M-dwarf check complete and added to box folder?; N/A vcheck; S/N ETC calcs done & documented?; Yes vcheck; Field images checked & saved?; Yes ... located at: box/ullyses_tech/ullyses_proposals/monitor/16018/images/ vcheck; Selected ACQ strategy?; Double ACQ/PeakXD+ACQ/PeakD, G230L, S/N = 40 vcheck; Possible ACQ or Sci spoilers?; No vcheck; Field BOT clear?; Yes vcheck; Visual BOT check for stars not in catalog?; Yes vcheck; Orbit packing finalized?; Yes vcheck; Buffer times optimized?; Yes vcheck; Verify visit grouping correct; Yes vcheck; phase constraint for ground based observations added?; N/A vcheck; BETWEENS for coordinated observations added?; Yes ... 01 OCT 2021 00:00 to 11 OCT 2021 08:10 and 12 OCT 2021 17:00 to 24 OCT 2021 04:15 and 25 OCT 2021 17:20 to 05 NOV 2021 21:10 vcheck; Is visit ready for int. review?; Yes Allocated COS orbits = 12 (Tic-Visit :proposal-id 16108 :visit-id "AN" :proposal-version -1 :trans-version "20210514" :date "01-Nov-2021 16:21:27.0" :trans-errors '(:WARNINGS 0 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "31" :si-bright-earth-limb-angle 20.0 :data-volume 61216 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 16108 :visit-id "AN" :obset-id "AN" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 16108 :visit-id "AN" :orbit-number 1 :pcs-time 393 :si-vis-utilization 2533 :al-overhead-at-end 0 :internal-dur-at-end 334 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 2927 :pcs-gap 0 ) true 1 0 Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the first of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522537) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKXD with PSA takes 5.8 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522540) in order to determine bright object safety. ACQ/PEAKXD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC (COS.sa.1522538) in order to determine exposure times. This is the one listed as the ETC run for the exposure. ACQ/PEAKD with PSA takes 5.3 seconds for S/N=40. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sa.1522541) in order to determine bright object safety. ACQ/PEAKD with PSA has peak pixel rate of 5.943 counts per second and global rate of 2997.808, so it is safe. This is the second of two ACQ/PEAKXD+ACQ/PEAKD used in order to improve the likelihood of a successful acquisition. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522552). 362.4388 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 181.2194 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522735) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522691) in order to determine bright object safety. Peak local rate of 5.943 counts per second and global rate of 2997.808, so it is safe. Buffer fill time = 786 seconds, and 2/3 of this is 524 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522553). 364.1707 seconds to achieve S/N = 20 at 2825 A. This time is halved (= 182.08535 seconds) to account for the other G230L cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522737) uses the expanded exposure time to fill the orbit (184 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is minimal. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522690) in order to determine bright object safety. Peak local rate of 5.927 counts per second and global rate of 2199.263, so it is safe. Buffer fill time = 672 seconds, and 2/3 of this is 448 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522544). 376.7304 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 94.1826 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522739) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522682) in order to determine bright object safety. Peak local rate of 0.315 counts per second and global rate of 548.875, so it is safe. Buffer fill time = 4297 seconds, and 2/3 of this is 2864.667 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds. Used model spectrum gmaur_lya2_etc.txt in the ETC in order to determine exposure times (COS.sp.1522545). 393.2034 seconds to achieve S/N = 30 at 1548.5 A. This time is quartered (= 98.30085 seconds) to account for both the other G160M cenwave and the two FP-POS settings per cenwave also observing this spectral feature. The listed ETC Run # for this exposure (COS.sp.1522741) uses the expanded exposure time to fill the orbit (186 seconds). The G160M exposures received priority for Unused Orbital Visibility, so the increased exposure time here is significant compared to the G230L exposures. Used model spectrum gmaur_lya2_x4.00_etc.txt in the ETC (COS.sp.1522683) in order to determine bright object safety. Peak local rate of 0.317 counts per second and global rate of 498.525, so it is safe. Buffer fill time = 4731 seconds, and 2/3 of this is 3154 seconds.