This target is not used in this proposal. This target is not used in this proposal. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Scan rate: 7.8 is too large. The legal range is >0.0 to 4.999999 under FGS control. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. Exp PCS Mode may not be specified in [Available]. edited for 1 Gyro mode -341536681 The leading determination of the Hubble constant comes from observations of Cepheid variables by HST calibrated by parallaxes from Gaia. This measurement is in tension with the value predicted by LambdaCDM calibrated by the CMB. The suggested limitation of the current cosmological model is a clue we must be pursue. The sample of Milky Way Cepheids observed by HST offers the means to build a still superior distance ladder and reach the long-targeted legacy goal of a 1% measurement of H0. Unfortunately, an unexpected Gaia anomaly has reduced the available precision of a Cepheid calibration sample planned well before Gaia's launch. We thus propose an HST SNAP program to double the current sample by imaging all remaining Milky Way Cepheids in Gaia's ``sweet spot'' for the greatest gain, using the same WFC3 bands for their extragalactic counterparts to nullify the effects of calibration errors along the distance ladder. The MW variables were selected to have the highest signal-to-noise in the measured parallaxes, the lowest reddening, to be fainter than Gaia's saturation limit, and with periods that directly calibrate extragalactic Cepheids and H0. The proposed sample has also been cleansed of astrometric binaries which degrade parallax precision, newly revealed by Gaia's EDR3 (December 2020). Together, Gaia and HST, each doing what they do best, can achieve what neither can do alone. Collecting these observations will lay a cornerstone for a 1% determination of H0 and continue to steadily advance our knowledge of what appears to be a new feature in the cosmological model. HST SNAP program to double the current sample by imaging all remaining Milky Way Cepheids in Gaia's ``sweet spot'' for the greatest gain, using the same WFC3 bands 6 false AVAILABLE STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 STAR CEPHEID This object was based on SIMBAD webpage results. J2000 1720614639741 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. 1725684208000 258.443865465577 (Tic-Visit :proposal-id 17098 :visit-id "AA" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:30:39.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AA" :obset-id "AA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AA" :obset-id "BA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AA" :obset-id "CA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AA" :obset-id "DA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AA" :obset-id "EA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AA" :obset-id "FA" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AA" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3010 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720611555084 1725599031000 257.80637077051506 (Tic-Visit :proposal-id 17098 :visit-id "AB" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 07:39:14.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AB" :obset-id "AB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AB" :obset-id "BB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AB" :obset-id "CB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AB" :obset-id "DB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AB" :obset-id "EB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AB" :obset-id "FB" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AB" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3010 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720614521565 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AC" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:28:41.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AC" :obset-id "AC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AC" :obset-id "BC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AC" :obset-id "CC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AC" :obset-id "DC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AC" :obset-id "EC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AC" :obset-id "FC" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AC" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3039 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1678600123000 59.29355181449199 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615239351 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AE" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:40:38.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AE" :obset-id "AE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AE" :obset-id "BE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AE" :obset-id "CE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AE" :obset-id "DE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AE" :obset-id "EE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AE" :obset-id "FE" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AE" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3119 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720614851050 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AF" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:34:10.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AF" :obset-id "AF" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AF" :obset-id "BF" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AF" :obset-id "CF" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AF" :obset-id "DF" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AF" :obset-id "EF" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AF" :obset-id "FF" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AF" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3119 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1666574235000 76.69999999999999 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1668733889000 57.337269850148914 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720614856930 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AI" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:34:16.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AI" :obset-id "AI" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AI" :obset-id "BI" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AI" :obset-id "CI" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AI" :obset-id "DI" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AI" :obset-id "EI" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AI" :obset-id "FI" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AI" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3032 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615242160 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AJ" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:40:41.0" :trans-errors '(:WARNINGS 7 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 2 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AJ" :obset-id "AJ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AJ" :obset-id "BJ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AJ" :obset-id "CJ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AJ" :obset-id "DJ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AJ" :obset-id "EJ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AJ" :obset-id "FJ" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AJ" :orbit-number 1 :pcs-time 380 :si-vis-utilization 401 :al-overhead-at-end 0 :internal-dur-at-end 0 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3032 :pcs-gap 0 ) (Tic-Orbit :proposal-id 17098 :visit-id "AJ" :orbit-number 2 :pcs-time 380 :si-vis-utilization 1051 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3032 :pcs-gap 0 ) true 2 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695332239000 161.5 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695639973000 156.8663973487612 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1676161766000 77.08150519125411 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1677115347000 82.24783097382061 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1694073880000 208.59912407060528 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615243416 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AP" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:40:43.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AP" :obset-id "AP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AP" :obset-id "BP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AP" :obset-id "CP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AP" :obset-id "DP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AP" :obset-id "EP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AP" :obset-id "FP" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AP" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3078 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615244660 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AQ" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:40:44.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AQ" :obset-id "AQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AQ" :obset-id "BQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AQ" :obset-id "CQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AQ" :obset-id "DQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AQ" :obset-id "EQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AQ" :obset-id "FQ" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AQ" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3119 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615245900 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AR" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:40:45.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AR" :obset-id "AR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AR" :obset-id "BR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AR" :obset-id "CR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AR" :obset-id "DR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AR" :obset-id "ER" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AR" :obset-id "FR" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AR" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3119 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1692290903000 114.86026572301722 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1691937190000 118.9645338009907 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1725501581000 174.05764181198361 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1724956367000 172.6792958287469 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1699346329000 260.3265969952846 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1699266785000 260.3265969952846 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615247141 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AY" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:40:46.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AY" :obset-id "AY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AY" :obset-id "BY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AY" :obset-id "CY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AY" :obset-id "DY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AY" :obset-id "EY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AY" :obset-id "FY" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AY" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3078 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615248385 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "AZ" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:40:48.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "AZ" :obset-id "AZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AZ" :obset-id "BZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AZ" :obset-id "CZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AZ" :obset-id "DZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AZ" :obset-id "EZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "AZ" :obset-id "FZ" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "AZ" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3078 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615831029 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BA" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:30.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BA" :obset-id "GA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BA" :obset-id "HA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BA" :obset-id "IA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BA" :obset-id "JA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BA" :obset-id "KA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BA" :obset-id "LA" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BA" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3034 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615832316 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BB" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:31.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BB" :obset-id "BB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BB" :obset-id "CB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BB" :obset-id "DB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BB" :obset-id "EB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BB" :obset-id "FB" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BB" :obset-id "GB" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BB" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3034 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615833599 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BC" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:33.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BC" :obset-id "GC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BC" :obset-id "HC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BC" :obset-id "IC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BC" :obset-id "JC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BC" :obset-id "KC" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BC" :obset-id "LC" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BC" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3119 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615834882 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. 1725769383000 147.0276817217939 (Tic-Visit :proposal-id 17098 :visit-id "BD" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:34.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BD" :obset-id "BD" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BD" :obset-id "CD" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BD" :obset-id "DD" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BD" :obset-id "ED" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BD" :obset-id "FD" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BD" :obset-id "GD" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BD" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3119 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615836159 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BE" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:35.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BE" :obset-id "GE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BE" :obset-id "HE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BE" :obset-id "IE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BE" :obset-id "JE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BE" :obset-id "KE" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BE" :obset-id "LE" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BE" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3078 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1691742124000 105.60000000000002 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615837434 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BG" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:37.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BG" :obset-id "BG" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BG" :obset-id "CG" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BG" :obset-id "DG" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BG" :obset-id "EG" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BG" :obset-id "FG" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BG" :obset-id "GG" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BG" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3049 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615839025 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BH" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:38.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BH" :obset-id "BH" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BH" :obset-id "CH" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BH" :obset-id "DH" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BH" :obset-id "EH" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BH" :obset-id "FH" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BH" :obset-id "GH" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BH" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3049 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695691476000 160.89999999999998 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1698135139000 128.82524750940752 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615840309 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BK" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:39.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BK" :obset-id "BK" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BK" :obset-id "CK" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BK" :obset-id "DK" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BK" :obset-id "EK" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BK" :obset-id "FK" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BK" :obset-id "GK" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BK" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3062 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615841591 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BL" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:41.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BL" :obset-id "BL" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BL" :obset-id "CL" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BL" :obset-id "DL" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BL" :obset-id "EL" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BL" :obset-id "FL" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BL" :obset-id "GL" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BL" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3062 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695566829000 220.19674389344425 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695571490000 220.1511793483025 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615842876 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BO" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:42.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BO" :obset-id "BO" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BO" :obset-id "CO" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BO" :obset-id "DO" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BO" :obset-id "EO" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BO" :obset-id "FO" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BO" :obset-id "GO" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BO" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3119 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615844161 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BP" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:43.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BP" :obset-id "GP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BP" :obset-id "HP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BP" :obset-id "IP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BP" :obset-id "JP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BP" :obset-id "KP" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BP" :obset-id "LP" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BP" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3119 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615845443 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BQ" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:45.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BQ" :obset-id "GQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BQ" :obset-id "HQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BQ" :obset-id "IQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BQ" :obset-id "JQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BQ" :obset-id "KQ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BQ" :obset-id "LQ" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BQ" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3015 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615846743 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BR" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:46.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BR" :obset-id "GR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BR" :obset-id "HR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BR" :obset-id "IR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BR" :obset-id "JR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BR" :obset-id "KR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BR" :obset-id "LR" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BR" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3015 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615848342 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BS" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:47.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BS" :obset-id "BS" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BS" :obset-id "CS" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BS" :obset-id "DS" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BS" :obset-id "ES" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BS" :obset-id "FS" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BS" :obset-id "GS" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BS" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3005 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1675744970000 68.0 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695429387000 222.5 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695446326000 222.5 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1668413982000 68.35370593344459 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1688172502000 193.45871498799 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615849630 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BY" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:49.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BY" :obset-id "GY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BY" :obset-id "HY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BY" :obset-id "IY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BY" :obset-id "JY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BY" :obset-id "KY" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BY" :obset-id "LY" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BY" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3099 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1720615850911 The scheduling data was generated by CASM 32.1.3. CASM was run in Phase II mode. (Tic-Visit :proposal-id 17098 :visit-id "BZ" :proposal-version -1 :trans-version "20240627" :date "10-Jul-2024 08:50:50.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "BZ" :obset-id "GZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BZ" :obset-id "HZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BZ" :obset-id "IZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BZ" :obset-id "JZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BZ" :obset-id "KZ" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "BZ" :obset-id "LZ" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "BZ" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3099 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1711352833000 302.2 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1705151480000 18.69999999999999 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1696927257000 118.80715111172412 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1671013263000 55.08179443393061 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1712472457000 342.0527472298054 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1706939110000 1.0 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1707212130000 353.0 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1698522411000 107.69999999999999 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695063979000 164.35885211547873 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695173072000 259.865612669407 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1693134792000 90.62749329025769 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1678540850000 265.99417632483653 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1678711658000 265.89140912016586 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1696397085000 110.97101660622837 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1692889781000 140.0 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1687858393000 165.15644337671142 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1685473642000 247.62392645915304 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1685910079000 270.1110427438314 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695463106000 176.48988065956001 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1692296738000 145.12904017559572 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1671001825000 39.45593836118661 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1699650775000 254.0685968204105 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1699736197000 254.0685968204105 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1694068249000 177.0899129122854 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint /private/var/folders/zc/ljhf1lgn10b1yd9ytmwlp4jr00070l/T/OPVisit9498234631837932019.xml 1725013600475 (Tic-Visit :proposal-id 17098 :visit-id "DR" :proposal-version -1 :trans-version "20240627" :date "30-Aug-2024 06:26:39.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "DR" :obset-id "DR" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "DR" :obset-id "ER" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "DR" :obset-id "X1" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "DR" :obset-id "X2" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "DR" :obset-id "X3" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "DR" :obset-id "X4" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "DR" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3119 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695326305000 158.81344157719832 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1691692736000 200.39738666943765 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1694963219000 229.4946967857437 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint /private/var/folders/zc/ljhf1lgn10b1yd9ytmwlp4jr00070l/T/OPVisit1768065573942806176.xml 1724960158016 (Tic-Visit :proposal-id 17098 :visit-id "EA" :proposal-version -1 :trans-version "20240627" :date "29-Aug-2024 15:35:57.0" :trans-errors '(:WARNINGS 6 :ERRORS 0 :HEALTH-AND-SAFETY 0 :FATAL-ERRORS 0 :CONTINUABLE-FATALS 0) :number-of-orbits 1 :saa-model "29" :si-bright-earth-limb-angle 20.0 :data-volume 577200 :tdrss-contact-duration 0 :coron NIL ) (Tic-Obset :proposal-id 17098 :visit-id "EA" :obset-id "EA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "EA" :obset-id "FA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "EA" :obset-id "GA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "EA" :obset-id "HA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "EA" :obset-id "IA" :pcs-mode "FGS" ) (Tic-Obset :proposal-id 17098 :visit-id "EA" :obset-id "JA" :pcs-mode "FGS" ) (Tic-Orbit :proposal-id 17098 :visit-id "EA" :orbit-number 1 :pcs-time 380 :si-vis-utilization 1452 :al-overhead-at-end 87 :internal-dur-at-end 667 :dark-offset NIL :dark-utilization 0 :max-dark-utilization 1920 :low-sky "N" :pcs-visibility 3062 :pcs-gap 0 ) true 1 0 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695219749000 234.22453851091961 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1695643958000 89.57542899480632 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1692461852000 109.97823693442268 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1694880419000 84.30000000000001 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1692718538000 114.53378752643948 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1693085632000 117.90290451534361 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1707468924000 288.7964413189003 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1696206717000 198.2159874055426 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1715853499000 282.3355879265754 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1688577710000 203.60038347293005 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1692633183000 124.0 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1688412101000 193.53700425176146 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1691418795000 170.10000000000002 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1670656666000 317.2328600841522 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint 1688258094000 192.51250812328487 false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint false -1 -1 IR scan, Cepheid moves across field IR scan, Cepheid moves across field, reverse IR scan, Cepheid moves across field scan, keep Cepheid within frame,reverse scan, keep Cepheid within frame Direct image to compare to amplitude of scan for zeropoint Direct image to compare to amplitude of scan for zeropoint