10150( 4) - 01/31/05 14:24 - [ 1] PROPOSAL FOR HUBBLE SPACE TELESCOPE OBSERVATIONS ST ScI Use Only ID: 10150 Version: 4 Check-in Date: 31-Jan-2005 19:21:35 1.Proposal Title: NICMOS observations of A1689 ------------------------------------------------------------------------------------ 2. Proposal For 3. Cycle 4. Parallel Pointing Tolerance GO 13 ------------------------------------------------------------------------------------ 5. Investigators Contact? PI: Dr. Narciso Benitez Instituto de Astrofisica de Andalucia (IAA) CoI: Dr. Felipe Menanteau The Johns Hopkins University N CoI: Prof. Mariano Moles Instituto de Astrofisica de Andalucia N (IAA) CoI: Dr. Marc Postman Space Telescope Science Institute N CoI: Dr. Richard L. White Space Telescope Science Institute N CoI: Ms. Kerry C. Zekser The Johns Hopkins University N CoI: Dr. Wei Zheng The Johns Hopkins University N CoI: Prof. Thomas J. Broadhurst Tel Aviv University - Wise Observatory N CoI: Mr. Dan Coe The Johns Hopkins University N CoI: Dr. Rychard Bouwens University of California - Santa Cruz N CoI: Dr. Renato Dupke University of Michigan N CoI: Prof. Marijn Franx Universiteit Leiden N CoI: Dr. Ignacio Ferreras Universitat Zurich, Theoretische Physik N CoI: Prof. Holland Ford The Johns Hopkins University N CoI: Dr. Brenda Frye Princeton University N CoI: Prof. Garth Illingworth University of California - Santa Cruz N CoI: Prof. Leopoldo Infante Universidad Catolica de Chile N ------------------------------------------------------------------------------------ 6. Abstract The potential of galaxy clusters as ``cosmic telescopes'' has been known for a long time, but practical results in the pre-ACS era have been scarce due to two main problems: the uncertainty in determining the magnification distribution of the cluster (the ``optics'' of the instrument) and the presence of numerous bright cluster galaxies which cover the field of view and hinder the detection of background galaxies. We have developed techniques to solve these two problems working with our ACS observations of A1689, the most powerful lens in the sky, and for the first time we have been able to determine the "specifications" of a cosmic telescope with a useful level of precision, thanks to the detection and identification of more than 100 multiple images with reliable redshift information. We propose to observe the high magnification region in the A1689 field in the F110W band with a 3x3 mosaic of NIC3 pointings; the resulting image will reach a lens- corrected limiting magnitudes of 29.5 for point sources, surpassing in depth the UDF NICMOS observations and providing an unique dataset with multiple scientific returns. ------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 2] Observations Description ------------------------ We take F110W images of the highly magnified region in the A1689 ACS field. We cover the area with 9 pointings. We spend 2 orbits on each pointing. On each pointing we take 6 dithered exposures. These are dithered by a pattern of 6 fractional pixel dithers, added with a pattern of integer pixel dithers. Real Time Justification ----------------------- Calibration Justification ------------------------- Additional Comments ------------------- ------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 3] TARGET LIST Fixed Targets ------------------------------------------------------------------------------------------------------------------------------------ Tar| Target | Target | Target |Coord | Radial | Flux data No | Name | Description | Position |Eqnx | Vel. | ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-1 CLUSTER OF GALAXIES, RA=13H11M25.7600S +/- 0.1", J2000 V = 16.0+/-1.0 GRAVITATIONAL LENS DEC=-01D19'55.62" +/- 0.1" Coordinate Source: GUIDE_STAR_CATALOG Comments: ACS A1689 field 1 1st field out of 9, in a 3x3 pattern 2 POS-2 CLUSTER OF GALAXIES, RA=13H11M28.8800S +/- 0.1", J2000 V = 16.0+/-1.0 GRAVITATIONAL LENS DEC=-01D19'42.54" +/- 0.1" Coordinate Source: GUIDE_STAR_CATALOG Comments: ACS A1689 field 2 2nd field out of 9, in a 3x3 pattern 3 POS-3 CLUSTER OF GALAXIES, RA=13H11M31.9800S +/- 0.1", J2000 V = 16.0+/-1.0 GRAVITATIONAL LENS DEC=-01D19'29.85" +/- 0.1" Coordinate Source: GUIDE_STAR_CATALOG Comments: ACS A1689 field 3 3rd field out of 9, in a 3x3 pattern 4 POS-4 CLUSTER OF GALAXIES, RA=13H11M26.5800S +/- 0.1", J2000 V = 16.0+/-1.0 GRAVITATIONAL LENS DEC=-01D20'42.34" +/- 0.1" Coordinate Source: GUIDE_STAR_CATALOG Comments: ACS A1689 field 4 4th field out of 9, in a 3x3 pattern 5 POS-5 CLUSTER OF GALAXIES, RA=13H11M29.7500S +/- 0.1", J2000 V = 16.0+/-1.0 GRAVITATIONAL LENS DEC=-01D20'29.64" +/- 0.1" Coordinate Source: GUIDE_STAR_CATALOG Comments: ACS A1689 field 5th field out of 9, in a 3x3 pattern 6 POS-6 CLUSTER OF GALAXIES, RA=13H11M32.8200S +/- 0.1", J2000 V = 16.0+/-1.0 GRAVITATIONAL LENS DEC=-01D20'16.61" +/- 0.1" Coordinate Source: GUIDE_STAR_CATALOG Comments: ACS A1689 field 6 6th field out of 9, in a 3x3 pattern 7 POS-7 CLUSTER OF GALAXIES, RA=13H11M28.5200S +/- 0.1", J2000 V = 16.0+/-1.0 GRAVITATIONAL LENS DEC=-01D21'21.09" +/- 0.1" Coordinate Source: GUIDE_STAR_CATALOG Comments: ACS A1689 field 7 field of 9, in a 3x3 pattern This field is shifted close to the center of the cluster to avoid observing a region not covered by ACS 8 POS-8 CLUSTER OF GALAXIES, RA=13H11M30.5800S +/- 0.1", J2000 V = 16.0+/-1.0 GRAVITATIONAL LENS DEC=-01D21'15.95" +/- 0.1" Coordinate Source: GUIDE_STAR_CATALOG Comments: ACS A1689 field 8 8 field out of 9, in a 3x3 pattern 9 POS-9 CLUSTER OF GALAXIES, RA=13H11M33.6700S +/- 0.1", J2000 V = 16.0+/-1.0 GRAVITATIONAL LENS DEC=-01D21'3.49" +/- 0.1" Coordinate Source: GUIDE_STAR_CATALOG Comments: ACS A1689 field 9 9th field out of 9, in a 3x3 pattern 10150( 4) - 01/31/05 14:24 - [ 4] Visit: 10 Visit Priority: Visit Requirements: ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D On Hold Comments: Additional Comments: Please do NOT schedule right after passage through South Atlantic Anomaly This produces nasty residuals in the images Exposures ------------------------------------------------------------------------------------------------------------------------------------ Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-1 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.3047, 0.8987; CUM GS ACQ SCENARIO BASE1NDS Comments: This is the 1st in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 2 POS-1 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.4219, 2.013 CUM Comments: This is the 2nd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 5] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 3 POS-1 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.1523, 1.5572 CUM Comments: This is the 3rd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 4 POS-1 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.9649, 0.0376 CUM Comments: This is the 4th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 5 POS-1 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.5586, 0.2402 CUM Comments: This is the 5th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 6] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 6 POS-1 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.168, 1.3546 CUM Comments: This is the 6th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ Sub Exposures ------------------------------------------------------------------------------------------------------------------------------------ Target | Exp |Instr | Oper. | Aper |Spectral|Cent.|Primary |Secondary |Iteration |CR-SPLIT |Orbit |Duration Name | Num |Config | Mode | or FOV |Element |Wave.|Pattern Pos |Pattern Pos |Num |Num |Number | ------------------------------------------------------------------------------------------------------------------------------------ POS-1 1 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-1 2 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-1 3 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-1 4 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-1 5 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-1 6 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM 10150( 4) - 01/31/05 14:24 - [ 7] Visit: 20 Visit Priority: Visit Requirements: ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D On Hold Comments: Additional Comments: Please do NOT schedule right after passage through South Atlantic Anomaly This produces nasty residuals in the images Exposures ------------------------------------------------------------------------------------------------------------------------------------ Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-2 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.3047, 0.8987; CUM GS ACQ SCENARIO BASE1NDS Comments: This is the 1st in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 2 POS-2 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.4219, 2.013 CUM Comments: This is the 2nd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 8] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 3 POS-2 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.1523, 1.5572 CUM Comments: This is the 3rd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 4 POS-2 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.9649, 0.0376 CUM Comments: This is the 4th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 5 POS-2 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.5586, 0.2402 CUM Comments: This is the 5th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 9] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 6 POS-2 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.168, 1.3546 CUM Comments: This is the 6th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. ------------------------------------------------------------------------------------------------------------------------------------ Sub Exposures ------------------------------------------------------------------------------------------------------------------------------------ Target | Exp |Instr | Oper. | Aper |Spectral|Cent.|Primary |Secondary |Iteration |CR-SPLIT |Orbit |Duration Name | Num |Config | Mode | or FOV |Element |Wave.|Pattern Pos |Pattern Pos |Num |Num |Number | ------------------------------------------------------------------------------------------------------------------------------------ POS-2 1 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-2 2 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-2 3 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-2 4 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-2 5 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-2 6 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM 10150( 4) - 01/31/05 14:24 - [ 10] Visit: 30 Visit Priority: Visit Requirements: ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D On Hold Comments: Additional Comments: Please do NOT schedule right after passage through South Atlantic Anomaly This produces nasty residuals in the images Exposures ------------------------------------------------------------------------------------------------------------------------------------ Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-3 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.3047, 0.8987; CUM GS ACQ SCENARIO BASE1NDS Comments: This is the 1st in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 2 POS-3 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.4219, 2.013 CUM Comments: This is the 2nd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 11] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 3 POS-3 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.1523, 1.5572 CUM Comments: This is the 3rd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 4 POS-3 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.9649, 0.0376 CUM Comments: This is the 4th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 5 POS-3 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.5586, 0.2402 CUM Comments: This is the 5th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 12] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 6 POS-3 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.168, 1.3546 CUM Comments: This is the 6th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ Sub Exposures ------------------------------------------------------------------------------------------------------------------------------------ Target | Exp |Instr | Oper. | Aper |Spectral|Cent.|Primary |Secondary |Iteration |CR-SPLIT |Orbit |Duration Name | Num |Config | Mode | or FOV |Element |Wave.|Pattern Pos |Pattern Pos |Num |Num |Number | ------------------------------------------------------------------------------------------------------------------------------------ POS-3 1 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-3 2 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-3 3 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-3 4 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-3 5 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-3 6 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM 10150( 4) - 01/31/05 14:24 - [ 13] Visit: 40 Visit Priority: Visit Requirements: ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D On Hold Comments: Additional Comments: Please do NOT schedule right after passage through South Atlantic Anomaly This produces nasty residuals in the images Exposures ------------------------------------------------------------------------------------------------------------------------------------ Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-4 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.3047, 0.8987; CUM GS ACQ SCENARIO BASE1NDS Comments: This is the 1st in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 2 POS-4 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.4219, 2.013 CUM Comments: This is the 2nd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 14] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 3 POS-4 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.1523, 1.5572 CUM Comments: This is the 3rd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 4 POS-4 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.9649, 0.0376 CUM Comments: This is the 4th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 5 POS-4 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.5586, 0.2402 CUM Comments: This is the 5th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 15] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 6 POS-4 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.168, 1.3546 CUM Comments: This is the 6th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ Sub Exposures ------------------------------------------------------------------------------------------------------------------------------------ Target | Exp |Instr | Oper. | Aper |Spectral|Cent.|Primary |Secondary |Iteration |CR-SPLIT |Orbit |Duration Name | Num |Config | Mode | or FOV |Element |Wave.|Pattern Pos |Pattern Pos |Num |Num |Number | ------------------------------------------------------------------------------------------------------------------------------------ POS-4 1 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-4 2 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-4 3 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-4 4 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-4 5 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-4 6 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM 10150( 4) - 01/31/05 14:24 - [ 16] Visit: 50 Visit Priority: Visit Requirements: ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D On Hold Comments: Additional Comments: Please do NOT schedule right after passage through South Atlantic Anomaly This produces nasty residuals in the images Exposures ------------------------------------------------------------------------------------------------------------------------------------ Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-5 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.3047, 0.8987; CUM GS ACQ SCENARIO BASE1NDS Comments: This is the 1st in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 2 POS-5 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.4219, 2.013 CUM Comments: This is the 2nd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 17] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 3 POS-5 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.1523, 1.5572 CUM Comments: This is the 3rd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 4 POS-5 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.9649, 0.0376 CUM Comments: This is the 4th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 5 POS-5 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.5586, 0.2402 CUM Comments: This is the 5th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 18] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 6 POS-5 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.168, 1.3546 CUM Comments: This is the 6th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ Sub Exposures ------------------------------------------------------------------------------------------------------------------------------------ Target | Exp |Instr | Oper. | Aper |Spectral|Cent.|Primary |Secondary |Iteration |CR-SPLIT |Orbit |Duration Name | Num |Config | Mode | or FOV |Element |Wave.|Pattern Pos |Pattern Pos |Num |Num |Number | ------------------------------------------------------------------------------------------------------------------------------------ POS-5 1 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-5 2 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-5 3 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-5 4 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-5 5 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-5 6 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM 10150( 4) - 01/31/05 14:24 - [ 19] Visit: 60 Visit Priority: Visit Requirements: ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D On Hold Comments: Additional Comments: Please do NOT schedule right after passage through South Atlantic Anomaly This produces nasty residuals in the images Exposures ------------------------------------------------------------------------------------------------------------------------------------ Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-6 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.3047, 0.8987; CUM GS ACQ SCENARIO BASE1NDS Comments: This is the 1st in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 2 POS-6 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.4219, 2.013 CUM Comments: This is the 2nd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 20] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 3 POS-6 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.1523, 1.5572 CUM Comments: This is the 3rd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 4 POS-6 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.9649, 0.0376 CUM Comments: This is the 4th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 5 POS-6 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.5586, 0.2402 CUM Comments: This is the 5th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 21] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 6 POS-6 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.168, 1.3546 CUM Comments: This is the 6th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ Sub Exposures ------------------------------------------------------------------------------------------------------------------------------------ Target | Exp |Instr | Oper. | Aper |Spectral|Cent.|Primary |Secondary |Iteration |CR-SPLIT |Orbit |Duration Name | Num |Config | Mode | or FOV |Element |Wave.|Pattern Pos |Pattern Pos |Num |Num |Number | ------------------------------------------------------------------------------------------------------------------------------------ POS-6 1 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-6 2 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-6 3 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-6 4 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-6 5 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-6 6 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM 10150( 4) - 01/31/05 14:24 - [ 22] Visit: 70 Visit Priority: Visit Requirements: ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D On Hold Comments: Additional Comments: Please do NOT schedule right after passage through South Atlantic Anomaly This produces nasty residuals in the images Exposures ------------------------------------------------------------------------------------------------------------------------------------ Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-7 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.3047, 0.8987; CUM GS ACQ SCENARIO BASE1NDS Comments: This is the 1st in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 2 POS-7 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.4219, 2.013 CUM Comments: This is the 2nd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 23] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 3 POS-7 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.1523, 1.5572 CUM Comments: This is the 3rd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 4 POS-7 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.9649, 0.0376 CUM Comments: This is the 4th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 5 POS-7 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.5586, 0.2402 CUM Comments: This is the 5th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 24] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 6 POS-7 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.168, 1.3546 CUM Comments: This is the 6th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ Sub Exposures ------------------------------------------------------------------------------------------------------------------------------------ Target | Exp |Instr | Oper. | Aper |Spectral|Cent.|Primary |Secondary |Iteration |CR-SPLIT |Orbit |Duration Name | Num |Config | Mode | or FOV |Element |Wave.|Pattern Pos |Pattern Pos |Num |Num |Number | ------------------------------------------------------------------------------------------------------------------------------------ POS-7 1 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-7 2 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-7 3 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-7 4 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-7 5 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-7 6 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM 10150( 4) - 01/31/05 14:24 - [ 25] Visit: 80 Visit Priority: Visit Requirements: ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D On Hold Comments: Additional Comments: Please do NOT schedule right after passage through South Atlantic Anomaly This produces nasty residuals in the images Exposures ------------------------------------------------------------------------------------------------------------------------------------ Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-8 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.3047, 0.8987; CUM GS ACQ SCENARIO BASE1NDS Comments: This is the 1st in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 2 POS-8 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.4219, 2.013 CUM Comments: This is the 2nd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 26] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 3 POS-8 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.1523, 1.5572 CUM Comments: This is the 3rd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 4 POS-8 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.9649, 0.0376 CUM Comments: This is the 4th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 5 POS-8 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.5586, 0.2402 CUM Comments: This is the 5th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 27] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 6 POS-8 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.168, 1.3546 CUM Comments: This is the 6th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ Sub Exposures ------------------------------------------------------------------------------------------------------------------------------------ Target | Exp |Instr | Oper. | Aper |Spectral|Cent.|Primary |Secondary |Iteration |CR-SPLIT |Orbit |Duration Name | Num |Config | Mode | or FOV |Element |Wave.|Pattern Pos |Pattern Pos |Num |Num |Number | ------------------------------------------------------------------------------------------------------------------------------------ POS-8 1 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-8 2 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-8 3 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-8 4 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-8 5 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-8 6 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM 10150( 4) - 01/31/05 14:24 - [ 28] Visit: 90 Visit Priority: Visit Requirements: ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D On Hold Comments: Additional Comments: Please do NOT schedule right after passage through South Atlantic Anomaly This produces nasty residuals in the images Exposures ------------------------------------------------------------------------------------------------------------------------------------ Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ------------------------------------------------------------------------------------------------------------------------------------ 1 POS-9 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.3047, 0.8987; CUM GS ACQ SCENARIO BASE1NDS Comments: This is the 1st in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 2 POS-9 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.4219, 2.013 CUM Comments: This is the 2nd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 29] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 3 POS-9 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.1523, 1.5572 CUM Comments: This is the 3rd in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 4 POS-9 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 0.9649, 0.0376 CUM Comments: This is the 4th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 5 POS-9 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG -0.5586, 0.2402 CUM Comments: This is the 5th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ 10150( 4) - 01/31/05 14:24 - [ 30] Exposures ----------------------------------------------------------------------------------------------------------------------------------- Exp | Target | Instr | Oper. | Aper |Spectral|Central| Optional |Num| Time | Special Num | Name | Config | Mode | or FOV |Element |Waveln.| Parameters |Exp| | Requirements ----------------------------------------------------------------------------------------------------------------------------------- 6 POS-9 NIC3 MULTIAC NIC3-FIX F110W NSAMP=16,SAMP-SEQ=SPARS64 1 DEF POS TARG 1.168, 1.3546 CUM Comments: This is the 6th in a series of 6 dithered groups on the same target. We dither by 0.25 to 0.5 fractional pixels between the groups. 4 of the 6 dithers lie on the corners of a 0.5x0.5 square. The other 2 lie in between on the diagonal. The sequence starts with these two, to minimize the effects of SAA persistence We have added a pattern of integer dithers, covering a range of 2 arcsec in both directions. We assume that the x axis of postarg lies exactly along the detector x axis. We used the 2002 scale, hopefully this is still valid. ------------------------------------------------------------------------------------------------------------------------------------ Sub Exposures ------------------------------------------------------------------------------------------------------------------------------------ Target | Exp |Instr | Oper. | Aper |Spectral|Cent.|Primary |Secondary |Iteration |CR-SPLIT |Orbit |Duration Name | Num |Config | Mode | or FOV |Element |Wave.|Pattern Pos |Pattern Pos |Num |Num |Number | ------------------------------------------------------------------------------------------------------------------------------------ POS-9 1 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-9 2 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-9 3 NIC3 MULTIAC NIC3-FIX F110W none none none none 1 N/A CUM POS-9 4 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-9 5 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM POS-9 6 NIC3 MULTIAC NIC3-FIX F110W none none none none 2 N/A CUM 10150( 4) - 01/31/05 14:24 - [ 31] Summary Form for Proposal 10150 Item Used in this proposal ------------------------------------------------------------------------------------------------------------------------------------ Apertures NIC3-FIX ------------------------------------------------------------------------------------------------------------------------------------ Configurations NIC3 ------------------------------------------------------------------------------------------------------------------------------------ Opmodes MULTIACCUM ------------------------------------------------------------------------------------------------------------------------------------ Optional Parameters NSAMP=16 SAMP-SEQ=SPARS64 ------------------------------------------------------------------------------------------------------------------------------------ Proposal Category GO ------------------------------------------------------------------------------------------------------------------------------------ Special Requirements ORIENT 120.0D TO 120.0 D; ORIENT 300.0D TO 300.0 D POS TARG 0.3047, 0.8987; GS ACQ SCENARIO BASE1NDS POS TARG 1.4219, 2.013 POS TARG -0.1523, 1.5572 POS TARG 0.9649, 0.0376 POS TARG -0.5586, 0.2402 POS TARG 1.168, 1.3546 ------------------------------------------------------------------------------------------------------------------------------------ Spectral Elements F110W ------------------------------------------------------------------------------------------------------------------------------------ Target Names POS-1 POS-2 POS-3 POS-4 POS-5 POS-6 POS-7 POS-8 POS-9 ------------------------------------------------------------------------------------------------------------------------------------